模溫機 返回列表頁

1、可根據需要任意選擇以水或熱媒油當傳熱介質。water/oil dual purpose mmachine can use either water or oil heating medium.2、選購配備的pid智慧型自動演算的溫度控制器，能準確顯示和控制模具溫度于所需要的溫度±1℃內。optional pid temperature controllers are used for accurate control of temperature within ±1℃3、兩段式加熱結構設計，可視所需之溫度增減電力，并配合特殊之發熱構造，可省時省電。two step heating se-lector gives rapid temperature increase control when required thus saning time & power i.e. start up in mornings。4、設想周到的各種電子保護裝置，如無熔絲開關，缺水或缺油，溫度異常及泵浦過負荷等自動警示系統，回路能自動切斷，確保安全。safety device containing an audible alarm will break the circuit automatically when the pump is overloaded,temperature overheats or there is a shortage of oil or water.5、油溫zui高可達199度。the hotest temperature is 199℃.